Aramid Air slide Fabrics have emerged as a good option for belting needs. They are suitable for a wide range of application. Due to the light weight of Aramid belts, the weight of the whole system can be reduced thus helping reduce the power consumption. Apart from this Aramid haveEXCELLENT RESISTANCEagainst heat and chemical, low elongation, flame resistant and no creep making it a suitable option for most belting needs. DDF offers Aramid conveyor belts as per the need of application and customer.
Aramid Air slide fabric
Aramid Air slide fabric also called Nomex air slide fabric and Kevlar air slide fabric in the market due to the raw material from the different suppliers. According to the different working circumstances, the aramid materials from DDF were adopted the aramid 1313 (similar to Nomex) and aramid 1414 (similar to Kevlar) according to the certain working circumstances.
The Aramid 1414 air slide fabric is fireproof, has high tensile strength and abrasion resistance, longer service life, and a maximum operating temperature resistance even up to 250℃.
For the aramid 1313 air slide fabric, which is the high-temperature resistance air slide fabric as well, this aramid air slide belt’s continuous operation temperature can be up to 200℃, and maximum peaks can be up to 220℃. This aramid air slide belt with shorter operation life and lower operation temperature, but can offer a more economical solution for some special air slide systems.
Aramid fiber also can be needle punched into nonwoven aramid air slide fabric (Nomex nonwoven air slide fabric) and offer some economical solutions for the air slide systems or homogenization systems.
The thickness of the aramid air slide membrane: 3~10 mm can be customized.
Width of the aramid (Nomex) air slide belt: max. 2.4 meters.
Air permeability: can be customized as requirements.
Tensile strength: > 5000N/4cm.
Temperature resistance: -60~250 ℃.
Clear veins, stable size, high tensile strength, and various materials for choosing according to the different requirements.
Equal air permeability, the tolerance of air resistance is within ±10%.
High-temperature resistance, abrasion resistance, little hygroscopicity, corrosion resistance, lower adhesive capacity, never delamination, and longer service life.
Smooth surface, 100% new materials, won’t leak dust, green products.
The products applicable to convey the materials with the particle diameter < 4mm, temperature < 250℃, the moisture content < 2%.
For some high-temperature particles/dry powder air slide conveying.